• Attractive - Like no other remotes on the market today.
• Ultra Thin - Just 5/16" (8mm). Fits easily in any pocket.
• Extreme Durability - Rubber buttons eliminate damage caused by electrostatic discharge and helps make transmitter waterproof. Gold-plated battery clips and contact points extend the life of the transmitter.
• Magic LED - Only appears when buttons are pressed.
• Frequency 315/ 433.92MHz. Variable capacitance controlled.
• Operates up to 500 feet (150 meters).
• 18 quintillion possible codes (Sk-917T4J), plus RF anti-scan protection.
• Use with SK-910R4 as well as SK-910R and SK-910R2.
• Includes 12VDC alkaline battery with handsome key chain ring.

Private label available. Contact Superior Electronics for details.

Size: 2" x 1.25" x .45"
(51 x 32 x 11 mm)

* Contact Superior Electronics for more  details.

Size: 3.5" x 2.19" x .5"
(88 x 55 x 12 mm)

SK-910R-4
Four-Channel CODEBUMP^™ Code-Hopping RF Receiver (Shunt/Momentary Operation)
Controls home automation functions, garage doors, alarm panels, etc., from up to 500 ft. Similar to SK-910R & SK-910R2 except with 4 RF outputs, independently programmable. Compatible with all SECO-LARM transmitters. Mode switch for easy programming. 4 LEDs, one per channel, indicate RF reception, learn mode, transmitter cleared, output type. Add optional plug-in extended range antenna: SK-91ERSD or SK-91ERSW.

Size: 5.31" x 4.33" x 1.1" (135mm x 110mm x 28 mm)

• Use to control home automation functions, garage door openers, house lights, alarm control panels, motorized gates, lifts or other devices by remote control.

• Patented CODEBUMP^™ anti-codegrabbing technology (requires use of CODEBUMP transmitter).
• Uses either fixed code (SK-919TD2A-U, SK-919TD1S-U, SK-919T4J, SK-919T1H, SK-919T2H, or SK-919T4H) or code hopping (SK-917T2A-U, or SK-917T4J) transmitters with up to 500 ft. range using standard antenna.
• External extended range antenna optional. Plugs directly into receiver PC Board. If SECO-LARM SK-91ERSD (Dipole Antenna) is used, range will be up to 1200 feet. If the SECO-LARM SK-91ERSW (Monopole Antenna) is used, range will be up to 800 feet.
• Mode switch for easy transmitter learning.
• Easily Code-learns up to 15 remotes per channel.
• Stores codes safely in EEPROM for up to one year in case of power loss.
• Four Form-C Dry Relay Contact (N.O./N.C./Common) Outputs. Each output rated 10 Amps at 24 VDC.
• 4 Separate Channels / 4 Output Modes Each:
  --a. Timed Momentary (1,2,3,4,5,10,30,60 sec.)
  --b. Toggle (On/Off)
  --c. Latch (Output stays on until manually reset)
  --d. Continuous or Validity (Output for as long as signal is received)
  
• All outputs are independently controlled. (i.e. Channel 1 can be toggle, Channel 2 can be one second momentary, etc.)
  Note: If the timed momentary output is chosen for any channel, there will be only one time available for all channels. In other words, if a one-second output time is selected for one channel, then all other timed momentary outputs will be one second.
  

Be prepared for today's thieves with SECO-LARM's patented CODEBUMP technology. With CODEBUMP, so-called "Code-grabbers" and "Scanners" are rendered obsolete because the RF code changes every time the transmitter button is pressed. In addition, with over 18 quintillion (1.8 x 1018) codes, the chances of ever repeating a code are virtually non-existent. SECO-LARM's CODEBUMP transmitters and receivers are perfect for controlling garage and gate openers, car and home alarms, plus much more.