|
Home
ISO 9002 Certified
Upcoming Events
Contact Us
New
Products
RF
Wireless Catalog
Burglar
Catalog
CCTV
Catalog
OEM
/ ODM Welcome
|
|
ENFORCER®
Series Curtain Sensors from SECO-LARM®
|
E-9622C2B25
2
Beams - Ht. 57cm. (1.9 ft)
E-9641C4B25
4
Beams - Ht. 105cm. (3.4 ft)
E-9660C6B25
6
Beams - Ht. 152cm. (5 ft)
E-9679C8B25
8
Beams - Ht. 201cm. (6.6 ft)
*
See also Twin
Photobeam Detectors
*
See also NIR
Retro-Reflective Photobeam Sensor
Typical
Applications:
-
For
indoor/outdoor perimeter security.
-
For
windows, doorways, etc., where space is limited.
|
(E-9641C4B25 shown)
|
Features:
- Install
on windows, doorways, skylights, fence tops, and any place where
space is limited..
- Perfect for
indoor and outdoor* perimeter security.
- Slim-line
design (11/8" x 15/16").
- 2,4,6 or
8 separate photoelectric beam sensors.Programmable trigger upon
simultaneousbreaking of any single or 2 adjacent beams.
- Rugged aluminum
construction.
- Anti-tamper
circuit for use when power is cut orend cap is removed.
- No synchronizing
wires required.
- N.O./N.C.
relay output.
- LED alignment
indicator.
- Brackets
and mounting hardware included.
|
|
Dimension
|
|
Typical
Installation
|
|
Specifications:
| Range
|
8m (25ft.) outdoor/16m(50 ft.) indoor |
| OperatingVoltage |
10~30VDC |
| Model
No. |
E-9622C2B25
|
E-9641C4B25
|
E-9660C6B25
|
E-9679C8B25
|
| Current
Drain |
68mA
|
81mA |
94mA |
108mA |
| Number
of Beams |
2 |
4
|
6
|
8 |
| Dimensions(mm) |
35
x 30 x570
|
35
x 30 x 1050 |
35
x 30 x1524 |
35 x 30 x 2008 |
| Detection
method |
Simultaneous break of 2 adjacent beams
or any single beam (programmable)
|
| Output |
NO./NC./COM relay output, 1A @ 120VAC/24VDC
|
| Operating
temp. |
-45¢X~
55¢XC |
Attenuation
LED
Configuration 1
Configuration 2 |
(OFF):
powered, aligned properly, (ON)beam is broken
(ON): Powered, aligned properly, (OFF)beam is broken |
| Enclosure
/ Case |
IP65 / Al alloy
|
| Response
time |
Breakage
of 1 beam: 2 sec.
Breakage of 2 adjacent beams : 0.5 sec. |
| Mounting
brackets |
Included
|
|
|