ENFORCER Security Systems


Home
ISO 9002 Certified
Upcoming Events
Contact Us


NEXT

BACK


Alarm Catalog

Accessory Catalog


OEM / ODM Welcome

 

 

Battery Backup and Relays
from SECO-LARM


SR-5209 & X-NP712
Backup battery system
  • SR-5209
    • Supplies power to alarm if car's main battery is destroyed or drained, or if main power line is cut.
    • Triggers the siren if the alarm's power is cut.
    • Chirps siren if car's headlights are left on after engine shut off.
    • Automatically charges backup battery (not included).
    • Backup battery does not drain when car is running, and is not affected by road vibration.

SR5209.jpg (8126 bytes)

X-NP712
  • 7 Amp hour battery for use with the SR-5209. (SR-5209 and X-NP712 are sold separately.)

XNP712.jpg (10515 bytes)

SR-5102-PW
Heavy-duty light flashing relay
  • Flashes car's lights or honks horn when the siren chirps or sounds.
  • Pre-wired relay with two 15A outputs, for flashing lights in any car, including dual-circuit European systems.
  • Connects to any alarm's siren output.
  • 5 wires, programmable 30 or 60 flashes/minute, programmable for instant (for lights) or delay (for horns) output.

SR5102.jpg (7396 bytes)

187-037SC
Relay
  • SPDT, 12V, 30A/40A heavy-duty automotive relay.
  • For starter disable, flashing lights, door locks, trunk release, more.

187037.jpg (3455 bytes)

SR-5150-C
Pre-wired relay sockets
  • Sealed on bottom with water-resistant rubber grommet.

    • Pre-wired (5 wires) for 1 SPDT relay (relay not included).

    • For open- or closed-circuit operation.

    SR5150C.jpg (7352 bytes)

    SR-5150-2C
    Pre-wired relay sockets
    • Pre-wired (9 wires) for 2 SPDT relays (relays not included).

    • For connecting 2 relays to alarm’s lock/unlock positive or negative signal outputs, or any mix of 2 relays (such as starter disable and flashing parking lights).

    SR51502C.jpg (5554 bytes)


    Can't find what you are looking for in this web site? 
    Please contact us.

    Go to The Top