ENFORCER Security Systems


Home
ISO 9001 Certified
Upcoming Events
Contact Us


NEXT

BACK


Alarm Catalog

Accessory Catalog


OEM / ODM Welcome

 

 

RF Receivers from SECO-LARM


SK-910R NEW
1-Channel Receiver
  • Uses SK-911TD (1-button) or SK-919T2A (2-button) transmitters.
  • Use to control garage door opener, house lights, alarm control panel, or other devices via remote control.
  • Two FORM-C dry relay contact (N.O./N.C./COMMON) outputs. Rated 10 Amps at 24 VDC.
  • Frequency 315MHz.
    • This revolutionary receiver incorporates:
      (1) Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.
      (2) HIGHER SENSITIVITY for greater operating distances.
      (3) UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
      (4) GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration.
  • LED to indicate RF reception, learn mode entered, transmitter learned, memory cleared.
  • Learns up to 15 transmitters.
  • Mode switch for easy transmitter learning and programming.
  • 4 Output modes (programmable):
    - 4-Sec. momentary, 1-Sec. momentary, Toggle, Latch.
  • Screw terminals for simple connection.
  • Also available at 433.92 MHz.

Size: 3.25" x 2.7" x 1.1"
(83 x 68 x 27.5mm)

SK-910R2 NEW
2-Channel Receiver (With CODEBUMP)
  • Uses SK-919TD2A (for fixed code) or SK-917T2A/SK-917T3A (for code hopping) transmitters.
  • Patented CODEBUMP™ anti-codegrabbing technology. (SK-917T2A only).
  • Use to control garage door opener, house lights, alarm control panel, or other devices via remote control.
  • Two FORM-C dry relay contact (N.O./N.C./COMMON) outputs. Rated 10 Amps at 24 VDC.
  • Frequency 315MHz.
    • This revolutionary receiver incorporates:
      (1) Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.
      (2) HIGHER SENSITIVITY for greater operating distances.
      (3) UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.
      (4) GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration.
  • 2 LEDs (one for each channel) indicate RF reception, learn mode entered, transmitter learned, memory cleared.
  • Learns up to 30 transmitters (15 for each receiver channel).
  • 2 Mode switches (one for each channel) for easy transmitter learning and programming.
  • 4 Output modes (programmable):
    - 4-Sec. momentary, 1-Sec. momentary, Toggle, Latch.
  • Screw terminals for simple connection.
  • Also available at 433.92 MHz.

SK910R2.jpg (10462 bytes)

Size: 3.25" x 2.7" x 1.1"
(83 x 68 x 27.5mm)

SK-916RSM3
3-Channel Code-Hopping Receiver
  • Patented CODEBUMP™ anti-codegrabbing technology.
  • Uses SK-916T3A transmitter.
  • Code learns up to 5 remotes, stores codes in EEPROM.
  • One channel programmable for shunt or momentary operation, 2 channels are momentary operation.
  • 2 built-in, Form-C dry relay (N.O./N.C./Common) contact outputs, max. 2A.
  • One LED for each channel to indicate when receiver receives signal from transmitter.

SK916RSM.jpg (6260 bytes)

Size: 3.25" x 2.7" x 1.1" (83 x 68 x 27.5mm)


Can't find what you are looking for in this web site? 
Please contact us.

Go to The Top