Home
ISO 9001
Certified
Upcoming
Events
Contact
Us
NEXT
BACK
Alarm Catalog
Accessory
Catalog
OEM / ODM Welcome
|
|
Sensors & Detectors from
SECO-LARM®
SS-052BB
Super Small Dual-Stage Electromagnetic Shock sensor!!
Dual-stage protection --
Chirps siren if car lightly tapped, triggers alarm upon break-in or vandalism attempts.
Patented electromagnetic
technology prevents false alarms, offers 360 protection.
Shielded from
electromagnetic interference, so no false alarms from pagers, cell phones, radios, or
other electronic devices.
Patented yellow
"Turbulence" LED pinpoints exact sensitivity by warning the installer if
environmental interference is high.
Two microfine sensitivity
adjustment controls for independent adjustment of interior and exterior zones.
Modular plug for fast
installation.
|
|
|
|
SS-052BA
Dual-stage electromagnetic shock sensor
- Dual-stage protection -- Chirps siren if car lightly
tapped, triggers alarm upon break-in or vandalism attempts.
- Patented electromagnetic technology prevents false
alarms, offers 360 protection.
- Shielded from electromagnetic interference, so no
false alarms from pagers, cell phones, radios, or other electronic devices.
- Patented yellow "Turbulence" LED pinpoints
exact sensitivity by warning the installer if environmental interference is high.
- Two microfine sensitivity adjustment controls for
independent adjustment of interior and exterior zones.
- Modular plug for fast installation.
|
|
|
|
SS-051ME / SS-051M
Dual-stage glass break detectors
- SS-051ME -- Includes remote microphone with 3-foot
long cable for easy mounting and concealment anywhere inside the car.
- SS-051M -- On-board microphone, no remote microphone
necessary. Dual-stage protection -- Chirps siren if window is lightly tapped, triggers
alarm upon break-in or vandalism attempts. Protects against a would-be thief's forced
entry into the car by breaking the window or punching a door lock. Attractively
designed to match the interior of almost any car. Built-in audio discriminator
enables the unit to filter out typical outdoor sounds to prevent false alarms. Patented
yellow "Turbulence" LED allows accurate setting of sensitivity by warning if
environmental noise is too high. Two microfine sensitivity adjustment controls for
independent adjustment of interior and exterior zones. Modular plug for fast
installation.
|
|
|
|
SS-052PBE
Single-stage electromagnetic shock sensor
- Single-stage protection -- Triggers alarm upon
break-in or vandalism attempts.
- Patented electromagnetic technology prevents false
alarms, offers 3600 protection.
- Shielded from electromagnetic interference so no false
alarms from pagers, cell phones, radios, or other electronic devices.
- Patented plastic mounting bracket.
- Install in engine compartment or on steering column.
|
|
|
|
SS-057
Motion/impact sensor
- Detects vibration or strong shocks caused by hitting,
jacking-up, or towing of car.
- Open or closed, negative or positive trigger circuits.
- Patented self-lock sensitivity adjustment screw holder
for easy pinpoint adjustment.
- Patented mounting bracket gives 3600 protection.
- Gold-plated contacts (oxidation-, sulfuration-, and
corrosion-resistant), assure reliable, long-term operation.
- Fixed molded contact strips prevent contact point
drifting.
|
|
|
|
SS-053
Mercury switch
- Protects hood, trunk, or other openings where pin
switches are impractical. 15-degree trigger.
- Open or closed, negative or positive trigger circuits.
- Small size and pre-wired leads for quick installation.
- 0.2A contact rating.
|
|
|
|
SR-199-315
Auxiliary sensor Y-connector
- Saves installation time.
- Allows any two SECO-LARM® dual-stage
sensors to be connected to an ENFORCER® alarm with no splicing.
- Adjust each sensor separately for best sensitivity,
with no cross interference.
- Works with the SLI® 259, SS-052BA,
SS-051M, SS-051ME.
|
|
|