Home
ISO 9001
Certified
Upcoming
Events
Contact
Us
NEXT
BACK
Alarm Catalog
Accessory
Catalog
OEM / ODM Welcome
|
|
Interfaces from SECO-LARM
SR-5202 / SR-5204
Power door lock kits
- Complete with control module (2 built-in relays), door
lock motors, 15A fuse, and all necessary hardware.
- Compatible with nearly every vehicle alarm lock/unlock
outputs.
- For cars without factory-installed power door locks,
or for vacuum-operated door locks (Mercedes or Audi) which require extra door lock motor
for remote activation.
- Manual operation of either front door will operate all
door lock motors.
- SR-5202-- Includes two
5-wire (master) door lock/unlock motors.
- SR-5204 -- Includes two
5-wire (master) door lock/unlock motors, plus two 2-wire (slave) door motors.
|

|
|
|
SR-5202-M/SR-5202-MS
Power door lock motors
- Add power door lock convenience to cars without
factory power door lock systems.
- Also for cars with vacuum-operated systems (Mercedes
or Audi) which require extra door lock motor for remote activation.
- Works with SR-5201-RMB or SR-5203UMB interfaces.
- 12VDC, includes mounting hardware.
- SR-5202-M -- 2-wire
(slave) door lock motor.
- SR-5202-MS -- 5-wire
(master) door lock motor.
|

SR-5202-M
|
|
|
SR-5201R / SR-5203A
Power door lock interfaces
- Allows nearly any alarm to control nearly any type
power door lock/unlocks.
- Includes 2 pre-wired, built-in, heavy-duty 30A relays
with protecting diodes and spike/noise suppressors.
- Negative lock/unlock signal inputs.
SR-5201-RMB - For alarms with specific separate negative
lock/unlock signal outputs. No built-in timer --depends on alarm system for lock/unlock
timing.
- SR-5203UMB - For alarms
with no specific lock/unlock signals. One- or two-wire input. Built-in programmable
(0.7/3.5-sec.) timer. Lock signal priority if lock and unlock signals received at same
time.
|

SR-5201R

SR-5203A
|
|
|
SR-5240 / SR-5440A
Power window roll up (or roll down) interfaces .
- Compatible with most power window systems. Works off
momentary or constant ground trigger.
- Built-in safety cut-off feature. Power window module
will temporarily stop functioning if there is a current overload.
- System override when ignition is turned on, doors
unlocked, or any door opened. (SR-5440A only)
- Interfaces with all ENFORCER® RF alarm
systems.
- SR-5240 --
Controls two windows, or one window and the sunroof.
- SR-5440A -- Controls four
power windows. The four windows roll up one-at-a-time.
|

SR-5240

SR-5440A
¡@ |
|
|
SR-5911
Power trunk release module
- Add power trunk release to cars without
factory-installed systems.
- Connect via relay to any alarm's auxiliary channel
output.
|

|
|